Product5 - Bulk Cloned-manufacture,factory,supplier from China

Decoration Particle Board Introduction:Particle board is made of wood or other lignocellulosic materials, applied adhesive and then glued together under the action of heat and pressure, also known as shredded board. It is mainly used in furniture manufacturing, construction industry and train and carriage manufacturing.Decoration Particle Board Advantages:A. Good sound absorption, sound insulation and thermal insulation properties;B. The internal granular crossed and staggered structure, the performance of each direction is basically the same, and the lateral bearing capacity is good;C.

Particleboard AdvantagesA. Good sound-absorbing and sound-insulating performance; Particleboard is heat-insulating and sound-absorbing;B. The interior is granular with a cross-staggered structure, the performance of each part is basically the same, and the lateral load-bearing capacity is relatively poor;C. The surface of the particle board is smooth and can be used for various veneers;D. In the production process of particleboard, the amount of glue used is small, and the environmental protection factor is relatively high.Particleboard DisadvantagesA.

   Particle board, also known as chipboard, is a wood-based board made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive, also known as flake board. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan.

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

What is particle board?  Particle board is also called chipboard or flakeboard. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

Product performance    The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.     The board surface texture is fine and smooth. When the ambient temperature and humidity change, the size stability is good, and the surface decoration treatment is easy.

Our Services:1. All inquires will be replied with 24 hours;2. Sample charge will be REFUNDED after you placed order;3. Strictly Quality Control by Professional QC Team;4. Factory Direct Competitive Price, One Stop Service, OEM Service Offered;5. Various Designs, Sizes & Colors are available;6. Selected High Quality Raw Material, Aesthetic appearance, High-End finishes;7. We can supplied EXW,FOB,CIF,DDU shipping terms;8.

          High-density fiberboard (English name: High Density Fiberboard, abbreviated as HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.          The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

Product Details:Product:MDF Material:Polar Pine Combi HardwoodGlue:MDI UF MEL WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:0.8-18mm or accept customizationDensity:650-1000 KG/CBMMoisture content:3%-13%MOQ:20 CBMDelivery time:15-25 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsage:Roof decking, furniture,packing,hoarding,signboards, portable building, interior and outerior decoration,

The difference between medium density fiberboard and particle board is so bigAbstract: There are many types of man-made panels, and many friends are always unclear when they are decorating. Some friends always can't tell the difference between particleboard and density board. In fact, as long as you know the two kinds of boards, it is very simple to distinguish them.1. MDF and particle board materials are differentParticleboard is processed by high temperature and high pressure after the logs are broken, and the wood chips are the main raw materials.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

    Medium density fiberboard is made of wood fiber and other fibers as raw materials, prepared by fiber, then applied with synthetic glue and other functional materials, and pressed into boards with different thicknesses and densities under heat and pressure. Among them, the moisture-proof MDF is made of modified melamine cyanamide adhesive or MDI type adhesive, and the use of waterproofing agent is improved at the same time.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

      Waterproof and moisture-proof board is made by adding special materials that can improve the waterproof, moisture-proof and mildew-proof performance of wood-based panels during the production of medium-density fiberboard.   It is suitable for high-humidity areas and places where accidental humidity may occur, such as kitchens Cabinets, bathroom vanity, laundry cabinet. Marked in green.

Manufacturing Process Broadcast1. Chipping: It is the manufacturing workshop of the raw materials in the whole board production. It mainly cuts loose wood into wood chips that meet the production specifications, so as to provide better conditions for fiber separation in preparation for heat.2. Thermal grinding. The wood chips cut out of the chipping workshop are preheated and cooked, and then mechanically separated to obtain fibers.3. Fiber drying: heat grinding and sizing to make the moisture content of the fiber reach 40%-50%.

The difference between flame-retardant MDF and ordinary MDF Appearance difference: Flame-retardant MDF is a kind of functional MDF. From the appearance, it is red, mainly because the fiber is dyed with red dye according to the international customary calendar, so as to distinguish it from ordinary MDF. Physical and mechanical properties Flame-retardant MDF is also MDF. First of all, it must have the physical mechanics of ordinary MDF to meet the use requirements.

What are the advantages of decorative board MDF?    Density board, also known as fiberboard, is a man-made board made of wood fiber or other plant fiber and applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Due to its softness, impact resistance and easy reprocessing, MDF is a good material for making furniture abroad. Density board is easy to finishing.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

How is Xinhua Wood MDF Board?    Xinhua Wood MDF board use fresh polar pine willlow or combi hardwood as raw material, advanced equipments mature production technology, strict quality control systerm , always a pre-production sample and check quality before packing, which ensure good quality and Xinhua Wood has 4 production lines , monthly output 50000 cbm, with sufficient stocks ,can deliver in 15-25 days.MDF Product DisplayThe Usage of MDF Fiberboard Furniture manufacturing: At present, MDF is mainly used to replace natural wood for furniture production.