product11 - Bulk Cloned-manufacture,factory,supplier from China

Everyone knows that density board is widely used in making furniture or decorating partitions because of its uniform structure, fine material, stable performance and easy processing. Everyone is curious, how to distinguish the quality of density board?Let me tell you something.1. Surface cleanliness: There should be no obvious particles on the surface of the density board with good surface cleanliness. Particles are caused by impurities brought in during the pressing process, which not only affects the appearance, but also makes the paint film easy to peel off.2.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

      Waterproof and moisture-proof board is made by adding special materials that can improve the waterproof, moisture-proof and mildew-proof performance of wood-based panels during the production of medium-density fiberboard.   It is suitable for high-humidity areas and places where accidental humidity may occur, such as kitchens Cabinets, bathroom vanity, laundry cabinet. Marked in green.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

     It is said that wall panels originated in England in the 16th century. Everyone knows that the climate in England is cold and humid. In order to block the damp and cold lower part of the wall, wall panels are used for insulation.    Another theory goes back to the Netherlands in 1300. At that time, Europe was in the dark Middle Ages, and knights wearing armor and holding long swords often scratched the walls of castles or palaces inadvertently. Protect with wood.     At the beginning, wall panels were mainly used in castles and palaces.

What details should be paid attention to when density board is veneered?        1. Moderate pressure: generally 2~3MPa, if it is too low, it will affect the bonding strength between the base material and impregnated paper, and if it is too high, it will damage the board.        2. Hot pressing time: it depends on the curing speed of the impregnated resin and the hot pressing temperature, generally 40-50s is appropriate. If the time is too long, the resin will be over-cured, lose its proper elasticity, and cause cracks in the subsequent processing.

What is Fire Resistant MDF ?How to produce it ? What is its application?The fireproof board is a kind of board that can suppress the burning speed of the flame in the ignited state, or directly extinguish the flame.

Product advantages:Flame retardant density board, its surface is flat and smooth, which is convenient for secondary processing. It can be pasted with rotary cut veneer, wood veneer, painted paper, impregnated paper, etc., and can also be directly painted, printed and finished; it has good mechanical processing performance, sawing, drilling , tenoning, milling, sanding and other processing properties are similar to wood, or even better than wood. The main purpose:1. Used for hanging panels, wall panels, showcase panels, and sound-absorbing panels;2.

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

The difference between density board and particle board    Solid wood particle board, also known as particle board, is different from MDF, which uses wood fiber and plant fiber as raw material, but uses log particles (small diameter wood, thinning wood, wood core, board skin, branch wood, etc.) The adhesive is processed by high temperature and high pressure.

Today I will tell you which one is better, E1 density board or E2, and the characteristics of MDF?Which is better, E1 density board or E2?    Since the glue used in the processing process will release carcinogenic formaldehyde, standards have been formulated according to the amount of formaldehyde released, including European standards, national standards, and American standards.

Medium Density Fiberboard classification:       According to the density, it can be divided into high-density board, medium-density board, and low-density board (the density of medium-density board is 550 kg-880 kg/m3, and the density of high-density board is more than 880 kg/m3). Commonly used specifications are 1220*2440mm and 1525*2440mm, and the thickness is 2.0mm~25mm.

1. Physical and mechanical propertiesDue to the uniform fiber structure of the board and the high bonding strength between fibers, its static bending strength, plane tensile strength, elastic modulus, and screw-holding force are better than particleboard. Hygroscopicity, water absorption performance, thickness expansion rate is low.2. Decorative performanceBecause the surface of medium density fiberboard is flat and smooth, it is easy to glue planed veneer and tissue paper and other decorative materials, and it is easy to paint and save paint.3.

Advantages of MDF1. The density of medium density fiberboard is very high, so it is called MDF. Its surface can be pasted with melamine or wood veneer. Its physical properties are very good, the material is uniform, and there is no dehydration problem, so it will not be deformed by moisture.2. Medium density fiberboard is made of crushed plant fibers and pressed at high temperature, so the surface of this board is very smooth and square. It can be used not only as furniture materials, but also as decorative panels, light metal sheets, veneer, etc.3. Is MDF high in formaldehyde?1.

The difference between medium density fiberboard and particle board is so bigAbstract: There are many types of man-made panels, and many friends are always unclear when they are decorating. Some friends always can't tell the difference between particleboard and density board. In fact, as long as you know the two kinds of boards, it is very simple to distinguish them.1. MDF and particle board materials are differentParticleboard is processed by high temperature and high pressure after the logs are broken, and the wood chips are the main raw materials.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

A. What material is MDF made of?1. Medium fiberboard is a kind of density board, which is divided into long fiberboard and short fiberboard. Its raw materials are mainly wood fibers or other plant fibers, which are made after crushing, fiber separation, drying, applying urea-formaldehyde resin or other suitable adhesives, and then hot pressing.2. MDF has a square and smooth surface, and its processing performance is excellent. It can be pasted with sliced veneer. It is often used to make furniture, partitions, etc.

What is carbon crystal wooden door？ Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite. This material is harder than steel and lighter than aluminum, it is high temperature resistant, corrosion resistant, and has a stable molecular structure. Carbon crystal fiber board, waterproof, zero formaldehyde, ultra-high density, is a high-end product worth having. And the carbon crystal wooden door, the wooden door made of this carbon element crystal.Advantages of carbon crystal wood doors1.

Carbon Crystal Panel and Its AdvantagesCarbon crystal panel is generally used in paint-free technology, with high environmental protection and good moisture resistance. In terms of materials, they all belong to composite boards. If they are under the same brand, the quality of carbon crystal boards is better. In contrast, carbon crystal panels are waterproof, moisture-proof, environmentally friendly, formaldehyde-free, crack-resistant and non-deformable. Carbon crystal plate is a new type of high-tech environmental protection material.

Fire Resistant MDF Features:1.Excellent flame retardant performance: Comply with the B1-B/B1-C regulations of GB8624-2012 "Classification of Combustion Behavior of Building Materials and Products". 2. Excellent environmental protection performance: the amount of formaldehyde released has reached the level of E0 and E1 in GB18580-2017 "Limits of formaldehyde release in wood-based panels and their products for interior decoration materials"3.

    Particleboard is a wood-based panel processed from wood or other non-wood plants. The middle layer of the particle board is wood chips, and the two sides are finely-organized wood chips, which are formed by hot pressing with adhesives and other additives. According to the structure, it can be divided into single-layer, double-layer, and gradient structure particle boards. The surface layer of the particleboard is powder layered, and the particleboard with uniform texture is the best.

What is medium density fiberboard (MDF)?      Medium density fiberboard (MDF) is a kind of man-made board made of hardwood, softwood fiber or other plant fiber, which is crushed, separated, dried, applied with urea-formaldehyde resin or other suitable adhesives, and then hot-pressed. Medium-density fiberboard (MDF), generally denser than plywood, is made of separated fibers, but like plywood can be used as a building material.

The benefits of MDF:Good flexibility (Because the door panel is often pushed and pulled to open and close, if it is too hard, it will easily lead to cracking, so this advantage of MDF can just be used)Easy to shape (because it is a powder structure, and very flat and smooth, so it is easy to shape, which just meets the needs of consumers for different shapes of door panels)Xinhua Wood Factory Appearance  Xinhua Wood Storages  Xinhua Wood Machinery  Xinhua Wood Quality Certificates  Xinhua Wood Factory IntroductionGaotang County Xinhua Wood Industry Co.,